is here! Shop now, pay later in 4 easy installments
Farming & Agriculture Ground Anchors
If you are looking for ground anchors to use for farming & agriculture take a look at our GroundGrabba steel drill driven screw-in ground anchor stakes. There are two varieties of Steel GroundGrabbas that may suit your needs.
The first is our GroundGrabba Pro which is 300mm in length and the other is the GroundGrabba Pro II which is 600mm in length. Both made of heat treated carbon steel that has been galvanised.
GroundGrabba Pro
The GroundGrabba Pro will grip and hold like you’ve never experienced before or thought possible.
GroundGrabba Pro for your general screw in ground anchors and all rounder for most of your anchoring needs. Made of super strong heat treated carbon steel that’s been galvanized they also have a lifetime replacement warranty. In extremely hard grounds we advise you to drill a pilot hole as you would if you were to drill into concrete.
GroundGrabba Pro II
Our GroundGrabba Pro II’s are made of super strong galvanised, heat treated carbon steel GroundGrabba Pro series can take whatever punishment you can throw at them. We give a lifetime replacement warranty to prove it!
GroundGrabba Pro II designed for your heavy duty solution to anchoring in the bush, sand or soft earth especially for large structures. GroundGrabba Pro II has the best anchoring ability you will find. We have personally tested these in a sideways pull tension test to over 1 ton.
SHOP GROUNDGRABBA NOW
The collar beneath the hex head is 25mm in diameter. The GroundGrabba Pro is 300mm in length and has flights (spirals or threads) that protrude out from the shaft 6mm. The shaft itself is 10mm making the overall diameter of shaft and flights 22mm. it will screw through a 19mm diameter hole washer.
We now also have a Pro I which is 450mm long and has the same width flights as the Pro II.
The Pro II is 600mm in length and shares the same hex and collar size as the Pro and Pro I.
Made of the same material, the flights are twice as wide as the pro extending out from the shaft 12mm each side making the overall diameter 34mm and capable of winding through a 7/8″ (22.225mm) diameter washer size hole.