Drill Bits | Masonry | Tungsten Tipped | 300-900mm

Drill Bits | Masonry | Tungsten Tipped | 300-900mm

Drill a pilot hole into hard ground to make the job easier!

check_circle Choose the length to suit

check_circle HIgh speed twist steel

check_circle Quick fit hex shank

check_circle 100% RISK FREE 12 Month Money Back Guarantee

check_circle 12 Month Warranty

$11.99
$11.99
Sold out
 
add_shopping_cart

-

Ordered

local_shipping

- - -

Order Ready

redeem

- - -

Delivered

favorite You May Also Like

Socket Drivers | 6 Star Hex | 3 Sizes Available | Medium Duty | Quick Fit

Socket Drivers | 6 Star Hex | 3 Sizes Available | Medium Duty | Quick Fit

$9.49
Drill Bits | Masonry | Tungsten Tipped | 300-900mm

Drill Bits | Masonry | Tungsten Tipped | 300-900mm

$11.99
$11.99
SAVE Sold out

From the Founder I’m David Levine, inventor of GroundGrabba. In 2017, Susu and I set out to create purpose-built ground anchors. Today, our range secures everything from tents to tiny homes. We back our steel anchors with a Lifetime Replacement Warranty* and a 100% RISK-FREE 12-month return policy. Whatever you need to anchor, we’ll keep you grounded.

View full details

More Information

check_box

What you Get

Your choice of:

  • 1x 12mmx300mm Masonry Drill with HEX shaft / shank
  • 1x 12mmx600mm Masonry Drill with HEX shaft / shank
  • 1x 12mmx600mm Masonry Drill with SDS shaft / shank
  • 1x 15mmx900mm Masonry Drill with SDS shaft / shank
check_box

Additional Information

If you go camping on really hard compact ground and you’re finding it almost impossible to drive your GroundGrabba Pro, Pro I or Pro II into the ground then try pre-drilling the ground using on of these masonry drill bits.

If using our GroundGrabba Commercial ground anchors or Threaded ground anchors with a 15mm shaft, we recommend using the 15mm x 900mm masonry drill with SDS shank.

You may need to drill the ground an inch or two at a time and keep clearing the hole if the ground is ‘that’ hard.  Perhaps you may also need to widen the hole too

check_box

Set Up  

check_box

Specifications

300mm Model

  • 12mmx300mm
  • 12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro possible.
  • Made of hardened steel with a tungsten tip.
  • Speed Hex clip in style shank
  • Weight: 175 grams
    Dimensions: 12×300mm

 

600mm Models

Hex Speed Shank

  • 12mmx600mm
  • 12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of your GroundGrabba Pro, Pro I or Pro II possible.
  • Made of hardened steel with a tungsten tip.
  • Speed Hex Clip in style shank
  • Weight: 250 grams
    Dimensions: 12mmx600mm

 SDS Shank 

  • 12mmx600mm
  • 12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro, Pro I or Pro II possible.
  • Made of hardened steel with a tungsten tip.
  • Weight: 250 grams
    Dimensions: 12mmx600mm

 900mm Model

  •  SDS Shank 
  • 15mmx900mm
  • 15mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro, Pro I or Pro II & our commercial GR14 range possible.
  • Made of hardened steel with a tungsten tip.
  • Weight: 400 grams
    Dimensions: 15mmx900mm
check_box

Recommendations

check_box

Disclaimer

⚠ Caution:

  • ❌ Do not use in grounds where there are underground services such as but not limited to: electricity, gas, phone, data, water. 
  • ❌ Do not use GroundGrabba products for any other purpose other than ground anchoring.
  • ❌ Not for timber, concrete, rock, bitumen, hot mix, tiles or Hard Large rocky grounds.
  • Match the correct cable gauge and GroundGrabba for the size and strength of the animal you intend to secure.
  • Deploy your GroundGrabba correctly for maximum anchoring
  • Misuse or abuse of GroundGrabba products can lead to injury or worse to the user or bystanders. 
  • Not to be used with mains powered drills. 
  • When using Battery drills please refer to the drill manufacturers warnings and safety instructions prior to use with GroundGrabba products. 
  • Only use GroundGrabba products for their intended purpose of ground anchoring things such as tents and shade canopies.
  • Always hold your drill firmly with both hands and use the inside of your legs as a drill guide with the drill handle in between your legs to help prevent torque twisting wrist or other injury. 
  • Always start your drill on the lowest torque setting.  Use a good quality high torque drill or impact wrench. 
  • For hard or extremely hard grounds we recommend pre drilling a minimum of a 10mm pilot hole to help with insertion. GroundGrabba Lites are only for soft loose grounds.
  • Some grounds will be impenetrable. 
  • Use the correct GroundGrabba for the job. 
  • The GG Pro (12") are not for loads in sand or soft grounds.

Warranty

check_box

Warranty

GroundGrabba is made to last! Every GroundGrabba steel product comes with a Lifetime Replacement Warranty against breakage or manufacturer defects. If you ever encounter a problem with your GroundGrabba Steel Pro products, simply let us know and we’ll replace it immediately — no questions asked.*

*conditions apply

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)