Tungsten-Tipped Masonry Drill Bits for Pilot Holes

Built tough for GroundGrabba installs, these tungsten-tipped masonry drill bits deliver fast, clean pilot holes through hard ground. Available in lengths from 300mm to 900mm, they’re impact and rotary hammer compatible, giving you the reach and strength needed for reliable anchor installation.

Drill Bits | Masonry | Tungsten Tipped | 300-900mm

Drill Bits | Masonry | Tungsten Tipped | 300-900mm

check_circle Tungsten-tipped for drilling into tough, compacted ground

check_circle Available in 300 mm, 600 mm, and 900 mm lengths

check_circle Hex and SDS shank options for different drill types

check_circle Perfect for creating pilot holes before driving GroundGrabbas

$29.99
$29.99
Sold out

Drill a pilot hole into hard ground to make the job easier!

check_circle Choose the length to suit

check_circle HIgh speed twist steel

check_circle Quick fit hex shank

check_circle 100% RISK FREE 12 Month Money Back Guarantee

check_circle 12 Month Warranty

favorite You May Also Like

Socket Drivers | 6 Star Hex | 3 Sizes Available | Medium Duty | Quick Fit

Socket Drivers | 6 Star Hex | 3 Sizes Available | Medium Duty | Quick Fit

$9.99
Drill Bits | Masonry | Tungsten Tipped | 300-900mm

Drill Bits | Masonry | Tungsten Tipped | 300-900mm

$29.99
$29.99
SAVE Sold out

From the Founder I’m David Levine, inventor of GroundGrabba. In 2017, Susu and I set out to create purpose-built ground anchors. Today, our range secures everything from tents to tiny homes. We back our steel anchors with a Lifetime Replacement Warranty* and a 100% RISK-FREE 12-month return policy. Whatever you need to anchor, we’ll keep you grounded.

View full details

More Information

check_box

What you Get

Your choice of:

  • 1x 12mmx300mm Masonry Drill with HEX shaft / shank
  • 1x 12mmx600mm Masonry Drill with HEX shaft / shank
  • 1x 12mmx600mm Masonry Drill with SDS shaft / shank
  • 1x 15mmx900mm Masonry Drill with SDS shaft / shank
check_box

Additional Information

If you go camping on really hard compact ground and you’re finding it almost impossible to drive your GroundGrabba Pro, Pro I or Pro II into the ground then try pre-drilling the ground using on of these masonry drill bits.

If using our GroundGrabba Commercial ground anchors or Threaded ground anchors with a 15mm shaft, we recommend using the 15mm x 900mm masonry drill with SDS shank.

You may need to drill the ground an inch or two at a time and keep clearing the hole if the ground is ‘that’ hard.  Perhaps you may also need to widen the hole too

check_box

Set Up  

check_box

Specifications

300mm Model

  • 12mmx300mm
  • 12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro possible.
  • Made of hardened steel with a tungsten tip.
  • Speed Hex clip in style shank
  • Weight: 175 grams
    Dimensions: 12×300mm

 

600mm Models

Hex Speed Shank

  • 12mmx600mm
  • 12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of your GroundGrabba Pro, Pro I or Pro II possible.
  • Made of hardened steel with a tungsten tip.
  • Speed Hex Clip in style shank
  • Weight: 250 grams
    Dimensions: 12mmx600mm

 SDS Shank 

  • 12mmx600mm
  • 12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro, Pro I or Pro II possible.
  • Made of hardened steel with a tungsten tip.
  • Weight: 250 grams
    Dimensions: 12mmx600mm

 900mm Model

  •  SDS Shank 
  • 15mmx900mm
  • 15mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro, Pro I or Pro II & our commercial GR14 range possible.
  • Made of hardened steel with a tungsten tip.
  • Weight: 400 grams
    Dimensions: 15mmx900mm
check_box

Recommendations

Learn More...

Use one of these Masonry drill bits to create pilot holes into hard earth to help the deployment of your longer GroundGrabba Pro I or Pro II or commercial range GR14's.

GroundGrabba have been designed for speed and ease using a cordless drill or impact driver. Sockets are essential for drill adaptation. Masonry drill bits are very helpful when you find the ground is super hard and you need to drill a pilot hole.

Video

Disclaimer

⚠ Caution:

❌  Do not use in grounds where there are underground services such as but not limited to: electricity, gas, phone, data, water. 

❌  Do not use GroundGrabba products for any other purpose other than ground anchoring.

    • Misuse or abuse of GroundGrabba products can lead to injury or worse to the user or bystanders. 
    • Not to be used with mains powered drills. 
    • When using Battery drills please refer to the drill manufacturers warnings and safety instructions prior to use with GroundGrabba products. 
    • Only use GroundGrabba products for their intended purpose of ground anchoring things such as tents and shade canopies. 
    • Always hold your drill firmly with both hands and use the inside of your legs as a drill guide with the drill handle in between your legs to help prevent torque twisting wrist or other injury. 
    • Always start your drill on the lowest torque setting. 
    • Use a good quality high torque drill or impact wrench. 
    • For hard or extremely hard grounds we recommend pre drilling a minimum of a 12mm pilot hole to help with insertion.
    • Some grounds will be impenetrable. 
    • Use the correct GroundGrabba for the job. 

 



Product Details & FAQs

check_box

What You Get

Each GroundGrabba Masonry Drill Bit is tungsten-tipped for durability and designed for making pilot holes in firm to hard ground.

Choose your size:
- 300mm × 12mm Hex Shank – fits standard drill chucks and hex-speed chucks
- 600mm × 12mm Hex Shank – fits standard drill chucks and hex-speed chucks
- 600mm × 12mm SDS Shank – for SDS rotary hammer drills
- 900mm × 15mm SDS Shank – for SDS rotary hammer drills

Always match the shank type to your drill for safe and effective use.

check_box

check_box

Tools Needed

GroundGrabba masonry drill bits come in 300mm, 600mm, and 900mm lengths.
The 300mm shank that fit both hex-speed chucks and standard drill chucks.
And the 600mm bits come in either HEX or SDS and fit the appropriate SDS rotary hammer drills.
The 900mm bit uses an SDS shank for SDS rotary hammer drills.
Always match the shank type to your drill for safe use.

check_box

check_box

Can you deliver to my address if I’m not in a metro area?

Yes. We ship Australia-wide. Regional and remote deliveries may take longer, and Star Track is our recommended courier for reliability outside metro areas. All orders are shipped with ATL (Authority to Leave) unless a signature is specifically requested at checkout.

check_box

When will my order arrive?

We dispatch from Tweed Heads, NSW several times a week. Metro areas are typically 1–3 business days depending on proximity to Brisbane/Eastern Seaboard; regional and remote deliveries may take longer. We recommend Star Track for reliability in regional and remote areas. Courier options and ETAs appear at checkout.

check_box

What warranty is included?

All steel GroundGrabba products come with a Lifetime Replacement Warranty against breakage in normal use. Accessories like bags, drill bits, and carabiners include a 12-month manufacturer’s warranty.

check_box

Can you deliver to my address if I’m not in a metro area?

Yes. We ship Australia-wide. Regional and remote deliveries may take longer, and Star Track is our recommended courier for reliability outside metro areas. All orders are shipped with ATL (Authority to Leave) unless a signature is specifically requested at checkout.

From the founder:

Hi, I’m David Levine, inventor of GroundGrabba. In 2017, Susu and I set out to create purpose-built ground anchors. Today, our range secures everything from tents to tiny homes. We back our steel anchors with a Lifetime Replacement Warranty* and a 100% RISK-FREE 12-month return policy. Whatever you need to anchor, we’ll keep you grounded.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)