Socket Driver & Drill Bit Sets | Various Sizes |

• 1 x 15mm* Hex Socket Driver + 1 x 12x300mm Masonry Drill Bit Hex shaft.

or

• 1 x 16mm Hex Socket Driver + 1 x 12x300mm Masonry Drill Bit Hex shaft.

or

• 1 x  16mm Hex Socket Driver + 1 x 12x600mm Masonry Drill Bit SDS shaft.

or

• 1 x 16mm Hex Socket Driver + 1 x 12x600mm Masonry Drill Bit Hex shaft

Simply snap the Hex Driver into any standard cordless rattle guns or drill chuck. Our Hex Socket Drivers are of medium strength for normal use. Not intended for use with extremely tough terrain or with high torque drills/rattle guns.

If you go camping on really hard compact ground and you’re finding it almost impossible to drive your GroundGrabba Pro into the ground then try pre-drilling the ground using the masonry drill bit. You may need to drill the ground an inch or two at a time and keep clearing the hole if the ground is ‘that’ hard.

Masonry drills come with different shank/shafts so please make sure your drill is compatible with these.

*PLEASE NOTE: 15mm socket Currently only for GroundGrabba Junior use. 16mm for new USA made GroundGrabbas and 19mm for GroundGrabba originals and Lite (If in doubt please ask us)

Our Hex drivers are a convenient socket with shank designed to help do what GroundGrabba's have been made for, and that is to make life easier by using a drill to deploy them.

NOTE:

15mm = GroundGrabba Junior

16mm = USA made GroundGrabba Pro and Pro I and Pro II

19mm =  GroundGrabba Originals and Lite

(If in doubt please ask us)

Use the 12 x 300mm Masonry drill bit to create pilot holes into hard earth to help the deployment of your GroundGrabba Pro 300mm or choose one of the 600mm varieties perfect for GroundGrabba Pro l and Pro II's.

All Socket Drivers Approx:

• Weight: 125grams
  Dimensions: 2.5x5cm

Drill Bit:

1/ & 2/

• 12x300mm
• 12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro possible.
• Made of hardened steel with a tungsten tip.
• Weight: 175grams
• Dimensions: 12x300mm 
• HEX Shaft/Shank

3/ 

• 12x600mm
• 12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro l and Pro II possible.
• Made of hardened steel with a tungsten tip.
• Weight: 250 grams
• Dimensions: 12x600mm
• SDS Shaft/Shank

4/

• 12x600mm
• 12mm Masonry Drill Bit to pre-drill holes into very hard ground to help make the insertion of GroundGrabba Pro l and Pro II possible.
• Made of hardened steel with a tungsten tip.
• Weight 250grams
• Dimensions: 12x600mm
• HEX Shaft/Shank