HookWasher Packs | Suits Commercial GR14 | 3.5mm Mild Steel | Hot Dip Galvanised
HookWasher Packs | Suits Commercial GR14 | 3.5mm Mild Steel | Hot Dip Galvanised
Add More, Save More - Click Below...
Couldn't load pickup availability
Made for our Commercial range, GR14 Hot dip galvanised Washers have a large 70mm diameter.
Suits GroundGrabba Commercial range & Our general range
Proprietary tear drop hole for GroundGrabba insertion
Mild steel
100% RISK FREE 12 Month Money Back Guarantee
Lifetime Replacement Warranty
HookWasher Packs | Suits Commercial GR14 | 3.5mm Mild Steel | Hot Dip Galvanised
From the founder:
Hi, I’m David Levine, inventor of GroundGrabba. In 2017, Susu and I set out to create purpose-built ground anchors. Today, our range secures everything from tents to tiny homes. We back our steel anchors with a Lifetime Replacement Warranty* and a 100% RISK-FREE 12-month return policy. Whatever you need to anchor, we’ll keep you grounded.
More Information
What you Get
What you Get
Additional Information
Additional Information
Set Up
Set Up
Specifications
Specifications
How They Work
How They Work
Disclaimer
Disclaimer
⚠ Caution:
- ❌ Do not use in grounds where there are underground services such as but not limited to: electricity, gas, phone, data, water.
- ❌ Do not use GroundGrabba products for any other purpose other than ground anchoring.
- ❌ Not for timber, concrete, rock, bitumen, hot mix, tiles or Hard Large rocky grounds.
- Match the correct cable gauge and GroundGrabba for the size and strength of the animal you intend to secure.
- Deploy your GroundGrabba correctly for maximum anchoring
- Misuse or abuse of GroundGrabba products can lead to injury or worse to the user or bystanders.
- Not to be used with mains powered drills.
- When using Battery drills please refer to the drill manufacturers warnings and safety instructions prior to use with GroundGrabba products.
- Only use GroundGrabba products for their intended purpose of ground anchoring things such as tents and shade canopies.
- Always hold your drill firmly with both hands and use the inside of your legs as a drill guide with the drill handle in between your legs to help prevent torque twisting wrist or other injury.
- Always start your drill on the lowest torque setting. Use a good quality high torque drill or impact wrench.
- For hard or extremely hard grounds we recommend pre drilling a minimum of a 10mm pilot hole to help with insertion. GroundGrabba Lites are only for soft loose grounds.
- Some grounds will be impenetrable.
- Use the correct GroundGrabba for the job.
- The GG Pro (12") are not for loads in sand or soft grounds.
Warranty
Warranty
Warranty
GroundGrabba is made to last! Every GroundGrabba steel product comes with a Lifetime Replacement Warranty against breakage or manufacturer defects. If you ever encounter a problem with your GroundGrabba Steel Pro products, simply let us know and we’ll replace it immediately — no questions asked.*
*conditions apply
Learn More...
Made for our GroundGrabba Commercial range, the GR14 Washers have a large 70mm diameter. These cover the large diameter hold that the flights (spirals) of the GroundGrabba Commercials need to get through to screw into the ground. Hot dipped galvanised for years of commercial use.
The GroundGrabba Hook Washer is designed to help you anchor down your outdoor equipment where the hole diameter needed to pass your GroundGrabba though is larger than the diameter of the GroundGrabba Hex Head and collar.
The diameter of the GroundGrabba Commercial Pro GR14 series have a collar diameter of 70mm. The GroundGrabba Hook Washer is wound onto the shaft then slid up under the collar giving your GroundGrabba a collar diameter of 70mm.
Best suited to our Commercial GR14 range.
What You Get
1 or 4 HookWashers
Specifications
- Made of mild steel
- Hot Dip Galvanised, anti-corrosion protection
- 60g
- 70mm diameter
- 3.5mm plate thickness
- 20mm hole diameter elongated through a special teardrop shape
Additional Information
If you have a ground anchoring hole larger than 40mm you will need one of these. The flange collar diameter of our GroundGrabba Commercial GR14 are 40mm which means unless you have some kind of washer, the hex and collar will slip through the hole.