If you’re looking for ground anchors for road barriers or road construction GroundGrabba have two versions that make set up deployment fast and easy into most ground types.
Depending on the size and type of your road barrier and its purpose you may need more or less per barrier. Our GroundGrabba Pro is 300mm in length and made of heat treated carbon steel that is galvanised. Drive them in with your impact wrench using a 19mm socket. There are external flights or threads that extend out from the shaft.
The GroundGrabba Pro has 6mm flights that protrude out from the shaft whereas the GroundGrabba Pro II has 12mm flights that protrude out from the shaft. Both shaft thicknesses are 10mm. This takes the overall diameter for the GroundGrabba Pro to 22mm and for the Pro II to 34mm.
Perhaps the ground will be softer or you need greater anchoring ability? If so then look to the GroundGrabba Pro II. With double the length and double width flights the GroundGrabba Pro II screws deep and bites hard.
Whether you are using temporary road barriers or needing them to be semi permanently fixed you will find GroundGrabbas to suit your purpose.
Also can be used for temporary fencing or hoarding.
Some road barriers are concrete others water filled but usually there are holes through the base to allow for some kind of staking. If there are no holes or the diameter won’t suit then simple adapter plates or other means can be used to adapt.
If your project is a large and significant one where you may need over 1,000 units we are always happy to provide you with bulk order pricing.