Ground Anchors For Outdoor Signs
Finding just the right way of anchoring down your outdoor signs can be a challenge especially when it can take so much time. GroundGrabba are not only ground anchors for outdoor signs but are great for all sorts of outdoor ground anchoring applications.
Save time by driving your GroundGrabba’s into the ground to secure your outdoor signs using your cordless drill or cordless impact wrench. Clip in a 19mm Hex Socket and away you go.
Three Different Varieties
As you can see from the above images that GroundGrabbas come in three varieties. Starting with our GroundGrabba Pro II which is the ultimate in grip even in soft ground and sand. It is 600mm in length to reach down and hold the earth. Then we have the GroundGrabba Pro which is 300mm in length and has spirals or flights half the width of the Pro II and is for general ground types from hard to soft. You will need to use your own judgement in your choice for the job. Then there is the GroundGrabba Lite which is made for loose and soft ground including sand. If it is for commercial jobs we suggest you stick with the Pro and Pro II as the GroundGrabba Lite is made of glass reinforced nylon and not steel.
Some signs are self supported and others need to be anchored down and others are a combination. Either way signs are not cheap to make and you want to make sure they stay put. You don’t want someone just walking off with it nor do you want the wind to blow it down or away. The best way to keep them grounded is by using GroundGrabbas. Groundabbas are perfect ground anchors for outdoor signs.
INDEPENDENT TESTS GAVE A BIG THUMBS UP
RV DAILY online magazine did a test review of old hammer in type pegs and stakes versus the new screw in variety like GroundGrabbas. The upshot was that GroundGrabba outperformed in most tests which to be honest did not surprise us because we have designed GroundGrabbas for the purpose of ground anchoring not just ground screwing.