Art Installations and Outdoor Sculpture Ground Anchoring
You've been working on your outdoor art installation for ages and now you're ready to install it for the exhibition. Problem is how are you going to secure it to the ground? GroundGrabba manufacture ground anchors that are designed specifically for ground holding ability. Be it for art installations and outdoor sculpture ground anchoring or for light aircraft tie downs GroundGrabba have drill driven screw-in ground anchor stakes to suit most ground types.
Get GroundGrabba Now
GroundGrabba have different models to cover most ground anchoring needs and ground types.
In our general use consumer range we have:
- GroundGrabba Pro (300mm with 10mm shaft width)
- GroundGrabba Pro I (450mm with 10mm shaft width)
- GroundGrabba Pro II (600mm with 10mm shaft width)
In our prosumer and commercial range we have:
- GroundGrabba Commercial Pro (450mm with thicker 15mm shaft width)
- GroundGrabba Commercial Pro I (600mm with thicker 15mm shaft width)
- GroundGrabba Commercial Pro II (900mm with thicker 15mm shaft width)
We also have a range of threaded ground anchors for more permanent art and sculpture installation ground anchoring.
Starting with the GroundGrabba Pro which is made for average to hard ground made of 1008 carbon steel which has been hot dip galvanised. Next up is our GroundGrabba Pro I which like the GroundGrabba Pro and Pro II which are both made of 1008 carbon steel that has been galvanised.
The GroundGrabba Pro is 300mm in length with a Hex Head for easy adaptation to your cordless drill. It has fights (spirals) that extend out from the shaft by 7mm. Made to use in most ground types. For extremely hard ground you will need to drill a pilot hole with a minimum of 12mm (max 14mm) in diameter and 300mm long.
Our GroundGrabba Pro I and II are the best for loose soft ground and sand. They reach 450mm and 600mm deep respectfully and have flights twice as wide at the Pro's. These can also be used in most ground types when you have larger works that need to stay put.
GroundGrabba Pro is 300mm in length and has spirals/flights that are 24mm in diameter. It comes with the same 19mm size Hex Head for easy cordless drill adaptors.
GroundGrabba Pro I is 450mm in length and with aggressive flights (spirals) almost 40mm wide. It has a Hex Head and has extreme grip in even the softest of grounds.
Get GroundGrabba Now
Get GroundGrabba Now
We developed and designed GroundGrabbas initially for camping. Towards the end of finalising designs it became apparent that GroundGrabbas surpass the needs of the average camper and are in a completely different class, that of Ground Anchors.
Check out RV Daily magazine review and tests of old hammer in stakes compared to new screw in ones including GroundGrabba. In this article you'll see how GroundGrabbas outperform the competition.
GroundGrabbas can be used not only for ground anchoring your outdoor art and sculpture but for other things like light aircraft or movie Sets. Check out our applications page.